Product Description
The CYB3211 digital display level transmitter is widely used at water plants, reservoirs, oil refineries, chemical works, glass works, sewage plants, etc.. High stable piezoresistive pressure sensor + high accurate circuit board + full sealed stainless steel housing, together they provide a great quality product that you can trust.
Features
·Digital Display
·High accuracy
·High reliability and stability
·Explosion-proof: Exia II CT6 Ga
Technical Index
| Range |
0~0.5... 200mH2O |
| Output signal |
4~20mA(1~5V) 2-wire |
| 0~10mA(0~5V) 3-wire |
| Accuracy |
0.1/0.2(0.25)/0.5%FS |
| Application temperature |
-10~80ºC |
| Storage temperature |
-40~100ºC |
| Housing |
1Cr18Ni9Ti |
| Medium |
liquid acompatible with SS316L |
| Power supply |
12~36VDC |
| Protection |
IP66 |
| Explosion-proof |
Exia II CT6 Ga |
Outline Dimension
Range: 0.5~20m
Notes
1. Please pay attention to the compatibility between the tested medium and the part of the product contacting the medium. When it is not clear, please consult our company.
2. Please specify the appropriate measuring range and accuracy requirements when ordering. In order to ensure the stability and accuracy of the product, it is recommended that the measuring range of the pressure transmitter should be 120% of the actual
measuring pressure range, and the maximum pressure should be within the measuring range.
3, when ordering the transmitter with LCD or LED junction box, the power supply of the transmitter should be no less than 15VDC.
4. In order to ensure reliable outdoor operation, it is recommended that users order transmitters equipped with lightning protection. During the installation, ensure that the product and power supply are reliably grounded, which can reduce the damage probability of the transmitter caused by lightning.
5. When selecting digital display products, the temperature range of transmitter working environment is - 30 ºC~70 ºC.
6. The product is vertically installed on the site pressure interface, and the display screen is horizontally facing the observer.
8. For media containing silt and sand, the transmitter head needs to take protective measures such as filtering measures to prevent the pressure tap from blocking or particles scratching the diaphragm.
9. When using in inflammable and explosive environment, please install safety barrier as required, and cable connection shall be sealed and reliable. Tighten the junction box lid before energizing, and ensure that the inner chamber of the transmitter is isolated from the environment. When cleaning, overhauling or modifying parameters, the power must be cut off completely, then remove the transmitter and move it to the safe environment for processing. Live operation on site is strictly prohibited.
Audited Supplier 
){kind=link}