CYB6300 series monocrystalline silicon pressure transmitter a high-performance, high-precision pressure transmitter. This product adopts the domestic advanced monocrystal silicon production process, embedded intelligent signal processing module, to achieve the perfect combination of static pressure and temperature compensation. The product has high measurement accuracy, good long-term stability, fast response rate, lightning protection and anti-interference protection, data backup and recovery functions. It can be applied to high stability and high accuracy of pressure and liquid level measurement in petrochemical, power transmission and other fields. The product supports LCD display, 4-20mA standard industrial analog signal output and HART communication protocol, which is convenient to use, safe and reliable, and supports PC terminal for configuration.
- 5-digit LCD digital display with backlight for real-time pressure indication
- key operation of the display block for data fine-tuning, range migration, data recovery, etc.
- standard HART communication, configurable via PC
- product with data backup and recovery function
- multiple display functions (Pa, kPa, MPa, bar, mbar, %, psi, mmH2O)
- monocrystalline silicon sensors away from the media contact surface for mechanical and thermal isolation
- built-in temperature-sensitive compensation elements increasing product accuracy and stability
- dual overload diaphragm protection design, bilateral static pressure up to 40 MPa
Applications
This product is mainly used for high stable and high precision pressure, differential pressure, liquid level and density measurement, etc. It can be configured on PC through HART protocol for real-time monitoring, and can be mainly applied in the following industries
- Pulp and Paper
- Machinery and Equipment / Shipbuilding
- Petroleum / Petrochemical / Chemical
- Steel / Nonferrous metals / Ceramics
- Electricity / City gas / other businesses
Performance parameters
Electrical parameters
| Power supply |
General purpose: 24VDC (10.5~45) VDC |
| Intrinsic safety explosion protection: 24VDC (10.5~26) VDC |
| Output signal |
4~20mA, 4~20mA+HART (Mode can be set) |
| Saturation current |
Upper limit: 20.8mA Lower limit: 3.8mA |
| Alarm current |
Upper limit: 22.8mA Lower limit: 3.6mA |
| Response time |
10ms |
| Load resistance |
0~2119Ω working condition |
| 250~600Ω HART communication |
| Power consumption |
≤500mW@24VDC, 20.8mA |
| Bridge resistance |
6k ±0.5kΩ |
| Power line spacing |
15cm or more (Please avoid parallel wiring) |
Technical Index
| Measurement medium |
Liquid or gas |
| Accuracy |
±0.1%(≥250KPa) |
| ±0.2% |
| Long-term stability |
< 0.1%FS/year |
| Calibration Temperature |
20ºC±5ºC |
| Zero-point temperature drift |
≤±0.01%FS/ºC |
| Sensitivity temperature drift |
≤±0.01%FS/ºC |
| Compensation temperature |
-30ºC~70ºC |
| Transmission distance |
< 1000 m |
| Power supply impact |
< 0.005%FS/V |
| Static pressure effect |
< 0.2% FS/ Upper limit 10MPa |
| Overpressure effects |
< 0.05% FS/10MPa |
| Vibration effects |
On arbitrary axes, 200HZ/g is 0.1%FS |
| Location Impact |
Between the horizontal and vertical positions approximately 400Pa |
| Zero Migration |
Migration within -20% to +20% of maximum range |
| Protection grade |
IP66 |
Temperature range
of measuring medium |
Silicon oil filled sensors: -40~120ºC |
| Fluorine oil filled sensor: -45~160ºC |
| Operating ambient temperature |
-40~85ºC, Integrated LCD display: -30~70ºC |
| Operating ambient humidity |
5~100%RH@40ºC |
| Storage ambient temperature |
-40~110ºC, Integrated LCD display: -30~70ºC |
Elwectromagnetic compatibility performance
| No. |
Test Items |
Basic Standards |
Test conditions |
Performance Grade |
| 1 |
Radiation interference (enclosure) |
GB/T 9254/CISPR22 |
30~1000MHZ |
Qualified |
| 2 |
Conducted interference (DC power port) |
GB/T 9254/CISPR22 |
0.15~30MHZ |
Qualified |
| 3 |
Electrostatic discharge (ESD) immunity |
GB/T 17626.2/IEC61000-4-2 |
4kV (Contacts)
8KV (Air) |
B |
| 4 |
RF EMF immunity |
GB/T 17626.3/IEC61000-4-3 |
10V/m
(80MHz~1GHz) |
A |
| 5 |
Industrial frequency magnetic field immunity |
GB/T 17626.8/IEC61000-4-8 |
30A/m |
A |
| 6 |
Electrical fast covariance pulse group immunity |
GB/T 17626.4/IEC61000-4-4 |
2kV
(5/50ns,5kHz) |
B |
| 7 |
Surge immunity |
GB/T 17626.5/IEC61000-4-5 |
2kV (Ground Line) |
B |
| 8 |
Conducted interference immunity for RF field induction |
GB/T 17626.6/IEC61000-4-6 |
3V(150KHz~80MHz) |
A |
Note: 1) A performance level: Performance is normal within the technical specification limits when tested.
2) B performance level: Temporary reduction or loss of function or performance at the time of testing, but capable of self-recovery, with no change in actual operating conditions, storage and its data. |
Appearance
Product dimension
Product selection
| Product Signal Output Selection |
| No. |
Output signal |
Outlet method |
| 1 |
LCD display |
\ |
| 2 |
LCD display+4~20mA |
two-wire |
| 3 |
LCD display+4~20mA+HART |
two-wire |
| Product range selection reference |
| Range |
Lower range limit |
Maximum range |
Single-ended overload |
Bilateral hydrostatic pressure |
| D |
G |
A |
| 6kPa |
-6kPa |
-6kPa |
- |
6kPa |
16MPa |
16MPa |
| 40kPa |
-40kPa |
-40kPa |
0kPa |
40kPa |
16MPa |
25MPa |
| 250kPa |
-250kPa |
-100kPa |
0kPa |
250kPa |
16MPa |
40MPa |
| 1MPa |
-500kPa |
-100kPa |
0kPa |
1MPa |
16MPa |
40MPa |
| 3MPa |
-500kPa |
-500kPa |
- |
3MPa |
16MPa |
40MPa |
| 10MPa |
- |
-500kPa |
0kPa |
10MPa |
20MPa |
- |
| 40MPa |
- |
- |
0kPa |
40MPa |
60MPa |
- |
* Bilateral static pressure is only available for differential pressure series
* D-differential pressure; G-gauge pressure; A-absolute pressure |
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensors since 1982.
2. Q: What's your quality control system?
A: ISO9001, CE, UKCA, SIL, ATEX, ROHS, REACH-SVHC Certificated.
3. Q: What is the warranty of your products?
A: Our warranty time is 12 months after shipment.
4. Q: What is lead time of your product?
A: Normally, our factory lead time is within 7~15 working days for products without customization.
You can also check lead time detail with our sales depending on different items.
5. Q: Do you provide customized products?
A: We can support OEM and ODM.
6. Q: What is your MOQ?
A: We have no MOQ limit, and samples are welcome.
7. Q: What's the transport?
A: We can arrange by air or by sea, etc. For more information, please contact Huatian's sales staff.
8. Q: What is your terms of payment ?
A: We can accept T/T or online.
Company Information
Tianshui Huatian Sensor Co., Ltd. is a new high-tech enterprise which combined R&D, production, sales with engineering service. It is one of the enterprises which engaged in the integrated pressure sensors and transducers in China. We have passed GB/T 19001-2008 quality management system certification in November 2009.
The Main Products:
CYX series pressure sensors, CYB series pressure transmitter, CYBD series intelligent measurement instrument, CYBK series electronic pressure switches and CW series temperature transmitters.
At present, the company has a number of patents with independent intellectual property rights for the integrated pressure sensors and transducers, which are widely used in industrial automation fields such as coal, oil, electric power, metallurgy, light industries and etc.
The First-Class Equipment:
Laser Trimming Machine; Gold Wire Ball Welding Machine; Shaped Cap Sealing Machine; Laser Welding Machine; High Vacuum Oiling Machine; Precision High Low Temperature Test Box; High Precision Automatic Temperature Compensation System and Automatic Test System and Other Hardware Facilities.
Business Advantages:
One hundred thousand purification plant (3000m2); Pressure sensors, transducers and intelligent digital instrument production line (200000 pieces annual output); A leading domestic OEM oil pressure sensor core body production line (1000000 pieces annual output); High-quality R & D team; Advanced process technology.
We are willing to create a splendid future with customers and partners hand in hand.
Factory Production Equipment
Electrical parameters
){kind=link}