Huatian Cyx20 Series Stanrard Differential Pressure Sensor

Product Description

 

Product Description

CYX20 series differential pressure sensor is a differential pressure sensitive device isolated by stainless steel double corrugated diaphragm. The accurate measurement is achieved by transmitting through the isolation diaphragm and filled silicone oil to the silicon pressure-sensitive element. The sensor is made of international advanced silicon pressure chips with high stability and high precision, and adopts the sintering base with stress optimization design. The sensor is produced by the following processes: patching, gold wire bonding, diaphragm welding, high vacuum oil injection, pressure cycle stress relief, high temperature aging, temperature compensation, etc. The shape, size and sealing mode of the general products are consistent with the international mainstream products of the same kind, and have good interchangeability. They are widely used for differential pressure and liquid level measurement of compatible media with 316L stainless steel, NBR or FKM.

Features

 

    1. measurement range: 0 ~ 10kPa…3.5MPa

    2.constant current / voltage supply 

    3. isolated structure, suitable for a variety of fluid media

    4.static pressure 10MPa

    5. all 316L stainless steel

    6. 1.5 times overvoltage of full scale
 

Applications

   1. industrial process control                                                         
   2. liquid level measurement of pressure vessel
   3. gas and liquid pressure measurement                                   
   4. pressure detection and calibration instrument
   5. differential pressure detection                                     
   6. flow meter

4 Technical indicators
4.1 Electrical performance

1. power supply: ≤ 3.0mA;DC ≤ 10V DC
2. electrical connection: 0.2mm² four color 100mm silicon rubber flexible wire
3. common-mode voltage output: 50% of current type input (typical value), 40% of voltage type input (typical value)
4. input impedance: 2.7kΩ ~ 5kΩ
5. output impedance: 3.0kΩ ~ 6kΩ
6. response time (10% - 90%): < 1ms
7. insulation resistance: 500MΩ / 100V DC
8. allowable overvoltage: 1.5 times of full scale

4.2 Structure performance

1. diaphragm material: stainless steel 316L
2. shell material: stainless steel 316L
3. pin lead: silicone rubber flexible wire
4. sealing ring:NBR, FKM (optional)
5. net weight: about 38g

4.3 Environment condition

1. vibration: no change at 10gRMS, (20-2000) Hz
2. constant acceleration: 100g, 11ms
3. media compatibility:liquid or gas compatible with 316L and NBR (FKM optional)

4.4 Base conditions

1. medium temperature: (25 ± 3) ºC
2. ambient temperature: (25 ± 3) ºC
3. humidity: (50% ± 10%) RH
4. ambient pressure: (86-106) kPa
5. power supply: (1.5 ± 0.0015) mA DC

4.5 Standard range sensitivity output and optional pressure form

Range	Full scale output (mV)	Typical value	Pressure form		Range	Full scale output (mV)	Typical value	Pressure form
0~10kPa	35~60	45	D		0~400kPa	60~80	70	D
0~20kPa	70~110	90	D		0~600kPa	90~120	100	D
0~35kPa	55~80	70	D		0~1.0MPa	80~120	100	D
0~70kPa	55~80	60	D		0~1.6MPa	125~185	150	D
0~100kPa	60~85	75	D		0~2.0MPa	50~70	60	D
0~200kPa	65~85	75	D		0~3.5MPa	100~120	110	D

4.6 Basic parameters

Parameters	Typical value	Max value	Unit
Full scale output	80	150	mV
Zero output	± 1	± 2	mV
Nonlinearity	0.2	0.5	%FS
Hysteresis	0.05	0.08	%FS
Repeatability	0.05	0.08	%FS
Input / output impedance	2.6	5.0	kΩ
Zero temperature drift (note 1)	±0.4	±1.0	%FS, @25ºC
Sensitivity temperature drift (note 2)	±0.4	±1.0	%FS, @25ºC
Long-term stability	0.2	0.3	%FS / year
Excitation current	1.5 (the maximum input voltage can be 10V)		mA
Insulation resistance	500(100VDC)		MΩ
Compensation temperature (note 3)	0~50; -10~70		ºC
Working temperature	-40~+125		ºC
Storage temperature	-40~+125		ºC
Response time	≤1		ms
Housing and diaphragm material	stainless steel 316L
O-ring	FKM, NBR, silicone rubber
Measuring medium	Fluids compatible with 316L, NBR or FKM or silicone
Life (25 ºC)	> 1 × 10^8 pressure cycle (80% FS)		times
Filling medium	silicone oil
Sealing ring	Φ 16 × 1.8mm (NBR or FKM (note 4))
Note 1 & 2. 0-10kPa zero temperature drift and sensitivity temperature drift: typical value is 0.5% FS @ 25 ºC, maximum value is 1.2% FS @ 25 ºC. Note 3. compensation temperature 0~ 50 ºC for ranges ≤200kPa; - 10ºC~ 70 ºC for ranges >200kPa. Note 4. temperature resistance range of  seal ring is - 20 ºC ~ 200 ºC, low temperature performance is poor, When the temperature is lower than - 20 ºC, please verify before using.

5 Model structure selection
5.1 Model selection and outline drawing of core body

5.2 Selection Guide

6 Schematic diagram and wiring mode

IN + (red wire) - power supply positive		IN - (black wire) - power supply negative
S + (yellow wire) - output positive		S - (blue wire) - output negative

 

7 Application Tips

1. The leading line end of the sensor is a high pressure end, and the other end is a low pressure end. The "H" and "L" marks on the sensor can also be used to identify the high and low pressure ends. During operation, the pressure added to the high pressure end should not be less than the pressure added to the low pressure end.
2. Housing: the inlet end of assembly cavity should be designed with a conical angle, which is easy to assemble and prevent the right angle from scratching the sealing ring. The "floating" sealing structure of O-ring on the side wall is recommended for sealing the differential pressure sensor, which can avoid the front end being compressed and the stability being affected.
3. Pay attention to protect the front and rear diaphragm and middle compensation circuit board, so as not to affect the performance or cause damage to the pressure sensor.
4. During assembly, pay attention to the tolerance fit between the pressure sensor size and the inner shell of the transmitter. It is recommended that the cavity be processed according to + 0.02 - + 0.05 of the pressure sensor diameter to achieve the required air tightness.
5. Avoid falling, crashing, etc., which will affect the stability of the product.
6. In case of any change of pin lead, the label with the pressure sensor shall prevail.

 

Company Information

Tianshui Huatian Sensor Co., Ltd. is a new high-tech enterprise which combined R&D, production, sales with engineering service. It is one of the enterprises which engaged in the integrated pressure sensors and transducers in China. We have passed GB/T 19001-2008 quality management system certification in November 2009.

The Main Products:

CYX series pressure sensors, CYB series pressure transmitter, CYBD series intelligent measurement instrument, CYBK series electronic pressure switches and CW series temperature transmitters.

At present, the company has a number of patents with independent intellectual property rights for the integrated pressure sensors and transducers, which are widely used in industrial automation fields such as coal, oil, electric power, metallurgy, light industries and etc.

The First-Class Equipment:

Laser Trimming Machine; Gold Wire Ball Welding Machine; Shaped Cap Sealing Machine; Laser Welding Machine; High Vacuum Oiling Machine; Precision High Low Temperature Test Box; High Precision Automatic Temperature Compensation System and Automatic Test System and Other Hardware Facilities.

Business Advantages:

One hundred thousand purification plant (3000m2); Pressure sensors, transducers and intelligent digital instrument production line (200000 pieces annual output); A leading domestic OEM oil pressure sensor core body production line (1000000 pieces annual output); High-quality R & D team; Advanced process technology.

We are willing to create a splendid future with customers and partners hand in hand.

Factory Production Equipment